KUPER FL 1000

Stand cantilever                                     1000 mm
min. veneer strip length approx.             300 mm*
min. veneer strip width approx.               35 mm*
Veneer thickness for standard approx.    0.4 - 2.5 mm *
Veneer thickness for "micro veneer" option approx.       0.25 - 2.5 mm *
Veneer thickness for "thick veneer" option approx.        0.4 - 5 mm *
Advance speed for normal veneer without glue application approx.       12 - 55 m/min
Advance speed for normal veneer with glue application approx.             12 - 40 m/min
Advance speed for Option „thick veneer“ without glue application approx.     5 - 55 m/min
Advance speed for Option „thick veneer“ with glue application approx.          5 - 40 m/min
Heating zone length                                                                                          1425 mm
Temperature control (+ Boost value) for normal veneer      0 - max. 200°C (+ 10°C**)
Temperature control (+ Boost value) for thick veneer         0 - max. 220°C (+ 20°C**)
Operating height                                                                 970 mm
Total connected load normal / with cooling approx.            4.1 kVA / 4.2 kVA
Advance drive                                                                    2 x 0.75 kW + 1 x 0.25 kW
Heating rail, top / bottom                                                    2 x 1.02 kW
Operating voltage, standard 400 V, 3+N+PE phases, 50 Hz
Compressed air 6 bar
Compressed air consumption approx. 5 l / min
Space requirement (L x W x H) in mm 2310 x 1970 x 1470mm
Net weight approx. 1300 kg